Xerox WorkCentre Pro 75, Operator'S Manual

Page: 22 / 76

Safety notes Operator Guide
2-10 DocuTech/DocuPrint 75/90 and DocuPrint 75 MX
• The power cord is the disconnect device for this printer.
• Do not override or disable electrical or mechanical interlocks.
• Do not push objects into slots or openings on the printer.
Electrical shock or fire may result.
• Do not obstruct ventilation openings. These openings
prevent overheating of the printer.
Controller
USA/Canada The controller requires a dedicated 115V AC 20 Amp grounded
receptacle.
Europe The controller requires a 220-240V, 13 or 10 Amp grounded
receptacle.
Controller cautions
Follow all safety cautions, warnings, and instructions marked on
the controller.
• Ensure that the voltages and frequency rating of the power
receptacle match the electrical rating label on the equipment.
• Do not make electrical or mechanical modifications to the
equipment.
• Use the power cable that is supplied with your controller. Do
not use an extension cord, or remove or modify the power
cord plug. If the plug must be changed, a qualified electrician
must install the plug correctly on the power cord.
• Plug the power cable directly into a correctly grounded
electrical outlet or into the power strip that is connected to
this outlet. If you are not sure whether or not the outlet is
correctly grounded, consult a qualified electrician.
• Do not use an adapter to connect the controller to an
electrical outlet that lacks a ground connection terminal.
• The power switch functions as a standby type of device only.
The power cord serves as the primary disconnect device for
the system.
• Do not push objects into slots or openings on the equipment.
Electrical shock or fire may result.