Product overview
Operator Guide
3-8
DocuTech/DocuPrint 75/90 and DocuPrint 75 MX
Insert paper as shown. The Bypass Tray extends to
accommodate paper that is physically longer than the tray.
Simply pull out the extension bar. Do not load paper above the
maximum fill line.
Loading paper in the High Capacity Feeder (Tray 6)
To load paper, open the cover and wait for the tray to lower.
When the paper has been loaded, close the cover to raise the
tray. The High Capacity Feeder is shown in
Figure 3-8.
Figure 3-8. Loading Trays 5 and 6
Changing the Tray 6 settings
You can set Tray 6 to hold either A4 or 8.5 x 11 inch paper.
An example of changing the tray setting from 8.5 x 11 inches to
A4 is shown in
Figure 3-9.
Insert paper for the
Bypass Tray here.
Pull the Extension
Bar to extend the
Bypass Tray
Insert paper for the
High Capacity Feed
Tray here
Summary of Contents for WorkCentre Pro 75
Page 6: ...TABLE OF CONTENTS iv OPERATOR GUIDE...
Page 28: ...Safety notes Operator Guide 2 16 DocuTech DocuPrint 75 90 and DocuPrint 75 MX...
Page 42: ...Product overview Operator Guide 3 14 DocuTech DocuPrint 75 90 and DocuPrint 75 MX...
Page 76: ...Problem solving Operator Guide 6 6 DocuTech DocuPrint 75 90 and DocuPrint 75 MX...
