Xerox WorkCentre PE16 User Manual Download Page 67

Page: 67 / 201

OPYING

Press

Enter

to save the selection.

Repeat steps 3 through 6, as needed.

To return to Standby Mode, press

Stop/Clear

OTES

While you set copy options, pressing

Stop/Clear

cancels

the changed settings and restores their default status.

Setting the Time Out Option

You can set the time the machine waits before it restores the
default copy settings, if you do not start copying after changing
them on the control panel.

Press

Menu

on the control panel until “Copy Setup”

appears on the top line of the display.

Press the scroll button (

) to display “Timeout” on

the bottom line.

Press

Enter

to access the menu item.

Press the scroll button (

) until the status you want

appears on the display.

You can select from 15, 30, 60 and 180 (seconds).
Selecting “Off” means that the machine does not restore
the default settings until you press

Start Copy/Fax

begin copying, or

Stop/Clear

to cancel.

Press

Enter

to save the selection.

To return to Standby Mode, press

Stop/Clear

Summary of Contents for WorkCentre PE16










































































































































































































Search results

Summary of Contents for WorkCentre PE16

Reviews:

Related manuals for WorkCentre PE16

Brands by name

Popular brands

Xerox WorkCentre PE16, User Manual

Search results

Summary of Contents for WorkCentre PE16

Reviews:

Related manuals for WorkCentre PE16

Brands by name

Popular brands