Xerox WorkCentre 7132, Service Documentation

Page: 1537 / 1726

January 2007
6-214 WorkCentre 7132
GP 13
Reversion 4.0 General procedures information
GP 14 Setup and Scan to PWS
Procedure
This procedure is intended to provide instructions for setting up the PWS and WC 7132 to
enable scanning to the PWS. Once the PWS is configured, it can be used as a tool to confirm
that a WC 7132 can scan and deliver a file via a network connection. Future attempts to verify
scanning to the PWS can be done by configuring the PWS to Obtain an IP Address Automat-
ically. Then simply enter the Scan folder name, User name, and Password into the WC 7132
as described in the following procedures (Preparing the WC 7132).
The first part of this procedure provides instructions to configure the PWS. For the PWS to
accept scanned files from the machine, it must be configured with an authorized user account
that the machine will use to log in with. The PWS also needs a shared folder that will be used
as a target location to copy the file into.
Preparing the PWS
Select the PWS Network Settings;
1. Select Start/Settings/Network Connections/Local Area Connections.
2. Access Properties. Scroll down and select Internet Protocol (TCPIP).
3. Select Properties and then select Obtain an IP Address Automatically.
4. Click on the Advanced button. Select the WINS tab.
5. Select Default inside the NetBIOS setting area of the window.
6. Select OK twice and Close to exit the windows.
Create a User Account for Scanning;
1. Right-Click My Computer on the PWS desktop and select Manage.
2. Select Local Users and Groups and then double-click the Users folder.
3. Select the Action menu item and select New User (Figure 1).
Figure 1 (new user)
4. Enter a new User Name and Password in the appropriate fields.
• You can put a statement such as Password is ……. in the Description field to
remind you if you forget the password some day. The password is case sensitive so
be accurate.
5. Uncheck User must change password at next logon.
6. Select Password Never Expires.
7. Select Create, then Close.
8. The new user will be displayed in the list – Close the Computer Management window.
Create and configure the Shared folder on the PWS;
1. Create a new folder on your C:/ drive (Named Scan in these examples).
2. Right-click the new folder and select Sharing and Security from the menu.
3. Compare the next two illustrations with the screen displayed on your PWS. Use the
instructions associated with the screen that matches your PWS.
If you see Figure 2;
• Select Share the folder on the network and Allow network users to change my
files.