Xerox WorkCentre 6400SFS, User Manual

Page: 64 / 248

Printing
WorkCentre 6400 Multifunction Printer
User Guide 64
Printing Booklets
With 2-sided printing, you can print a document in the form of a small book. Create booklets for any
paper size that is supported for 2-sided (duplex) printing. The driver automatically reduces each page
image and prints four pages per sheet of paper (two on each side). The pages are printed in the correct
order so that you can fold and staple the pages to create a booklet.
When you print booklets, you can also specify the creep and gutter in supported drivers.
• Creep : Specifies how much the page images are shifted outward (in 10ths of a point). This
compensates for the thickness of the folded paper, which otherwise would cause the page images
to shift slightly outward when folded. You can select a value from zero to 1.0 points.
• Gutter : Specifies the horizontal distance (in points) between the page images. A point is 0.35 mm
(1/72 in.)
.
The following additional booklet printing options are available in some drivers:
•
Draw Page Borders : Prints a border around each page.
• Target Paper Size : Specifies the size of the paper for the booklet.
• Right to Left : Reverses the order of the pages in the booklet.
To select booklet printing:
Windows
1. Select the Layout/Watermark tab.
2. Select the Booklet Layout option.
3. Click the Booklet Options button to specify the creep and gutter.
4. If desired, select Draw Page Borders from the drop-down list.
Macintosh
1. In the
Print
dialog box, select
Xerox Features
, and then the
Layout/Watermark
drop-down list.
2. Select
Enable for Booklet Printing.
3. If desired, specify the creep and gutter with the
Booklet Options
button.
4. If desired, specify the paper size from the
Target Paper Size
drop-down list.
Creep Gutter