Xerox WorkCentre 6400SFS, User Manual

Page: 164 / 248

Maintenance
WorkCentre 6400 Multifunction Printer
User Guide 164
Cleaning the Laser Lenses
This printer is constructed with four laser lenses. Clean all lenses as described below. The laser lens
cleaning tool should be attached to the inside of the front door.
1. Open the printer’s front door.
2. Remove the laser lens cleaning tool from its holder on the inside of the front door.
3. With the foam pad facing down, insert the laser lens cleaning tool into the cleaning port (identified
with a color triangle label for each of the 4 colors) until it reaches the beginning of the handle.
4. Pull out the tool and then repeat two or three times. Repeat this process for each of the 4 lenses.
5. Return the laser lens cleaning tool to its holder on the inside of the front door. Storing the laser lens
cleaning tool in the printer’s front door keeps it from getting lost.
6400-087
6400-088