Installation and Setup
44
WorkCentre 6015 Color Multifunction Printer
User Guide
Installation and Setup Overview
Before printing, your computer and the printer must be plugged in, turned on, and connected. Configure
the initial settings of the printer, then install the driver software and utilities on your computer.
You can connect to your printer directly from your computer using USB, or connect over a network using
an Ethernet cable or wireless connection. Hardware and cabling requirements vary for the different
connection methods. Routers, network hubs, network switches, modems, Ethernet cables, and USB cables
are not included with your printer and must be purchased separately. Xerox recommends an Ethernet
connection because it is typically faster than a USB connection, and it provides access to CentreWare
Internet Services.
Note:
If the Software and Documentation disc is not available, you can download the latest drivers
from
www.xerox.com/office/WC6015drivers
.
See also:
Selecting a Location for the Printer
on page 45
Choosing a Connection Method
on page 46
Connecting the Printer
on page 46
Configuring Network Settings
on page 52
Installing the Software
on page 59