Introduction
Xerox® Smart Card
Installation Guide
7
Card Readers and Card Types
Supported Card Types
The customer is responsible for purchasing and configuring the access cards. The following card types
are recommended:
•
Gemalto TOP DL GX4 144K V2.6.2b Applets
•
Oberthur ID-One Cosmo v5.2 128K V2.6.2 Applets
•
Oberthur ID-One Cosmo v5.2 72K V2.6.1 Applets
•
Oberthur ID-One Cosmo v5.2D 72K V2.6.1 Applets
•
Oberthur ID-One Cosmo v5.2 72K V2.6.2 Applets
•
Gemalto GemCombiXpresso R4 dual interface 72K V2.6.2 Applets
•
Axalto Access 64KV1
•
Axalto Access 64KV1
•
Gemplus GXP3 64V2N V2.6.1 Applets
•
Gemalto Cyberflex Access V2C 64K V2.6.1 Applets
•
Oberthur ID-One Cosmo V5.2D 64K
•
Oberthur OCS Galactic V1 32K V1 Applets
•
Oberthur Cosmo V4 32K V1 Applets
•
Schlumberger / Axalto Cyberflex V2 32K V1 Applets
Other card types may function with the solution, but have not been validated.Supported Card Types
Supported Card Readers
The customer is responsible for providing a card reader for each Xerox device. The following card
readers are compatible with the solution:
•
Gemplus GemPC USB SL
•
Gemplus GEMPC Twin
•
SCM Micro SCR3310
•
SCM Micro SCR3311
•
OmniKey Cardman 3021 USB
•
OmniKey Cardman 3121 USB
•
ActivCard USB Reader V2 with SCR-331 firmware
Other CCID compliant readers may function with the solution, but have not been validated.
Note:
Information about CCID compliant card readers can be obtained from various websites, for
example www.pcsclite.alioth.debian.org/ccid.This site is not a Xerox website and is not endorsed
by Xerox.
