Xerox Work Centre PE114e User Manual Download Page 16

Page: 16 / 134

ETTING

TARTED

1.2

Unpacking

Remove the machine and all accessories from the packing

carton. Make sure that the machine has been packed with the

following items. If there is a missing item, contact the retailer

where you bought the machine:

OTES

• The appearance of the power cord may differ according to your

country’s specifications.

• The CD-ROM contains the Xerox printer drivers, Scan drivers,

ControlCentre, the user’s guide, and the Adobe Acrobat Reader

program.

• Components may differ from one country to another.
• The power cord must be plugged into a grounded power socket.

Remove the packing tape from the front, back and sides of the

machine.

Tape

Summary of Contents for Work Centre PE114e







































































































































Search results

Summary of Contents for Work Centre PE114e

Reviews:

Related manuals for Work Centre PE114e

Brands by name

Popular brands

Xerox Work Centre PE114e, User Manual

Search results

Summary of Contents for Work Centre PE114e

Reviews:

Related manuals for Work Centre PE114e

Brands by name

Popular brands