Xerox Work Centre PE114e User Manual Download Page 23

Page: 23 / 134

ETTING

TARTED

1.9

Pay attention to the paper limit mark on the left inside wall
of the tray. Paper overloading may cause paper jams.

Insert and slide the paper tray back into the machine.

OTE

: After you load the paper, you need to set up your machine

for the paper type and size you loaded. See page 1.20 for copying,

or page 3.7 for PC-printing.

Changing the Paper Size in the Paper Tray

To load longer sizes of paper, such as Legal-sized paper, you

need to adjust the paper guides to extend the paper tray.

After pressing and unlatching the guide lock, slide the
paper length guide outward as far as it will go. This extends

the length of the tray.

Summary of Contents for Work Centre PE114e







































































































































Search results

Summary of Contents for Work Centre PE114e

Reviews:

Related manuals for Work Centre PE114e

Brands by name

Popular brands

Xerox Work Centre PE114e, User Manual

Search results

Summary of Contents for Work Centre PE114e

Reviews:

Related manuals for Work Centre PE114e

Brands by name

Popular brands