Xerox Work Centre PE114e User Manual Download Page 116

Page: 116 / 134

ROUBLESHOOTING

7.16

Wrinkles or

creases

• Ensure that the paper is loaded properly.
• Check the paper type and quality. See “Paper Specifications”

on page A.5.

• Turn the stack of paper over in the paper tray. Also try

rotating the paper 180° in the tray.

• Try printing to the rear output slot.

Back of printouts

are dirty

Check for leaking toner. Clean the inside of the machine.

See page 6.3.

Black pages

• The toner cartridge may not be installed properly. Remove

the cartridge and reinsert.

• The toner cartridge may be defective and need replacing.

Remove the toner cartridge and install a new one. See

“Replacing the Toner Cartridge” on page 6.8.

• The machine may require repair. Contact a service

representative.

Loose toner

• Clean the inside of the machine. See page 6.3.
• Check the paper type and quality. See “Paper Specifications”

on page A.5.

• Remove the toner cartridge and install a new one. See

“Replacing the Toner Cartridge” on page 6.8.

• If the problem persists, the machine may require repair.

Contact a service representative.

Condition

Suggested solutions

Summary of Contents for Work Centre PE114e







































































































































Search results

Summary of Contents for Work Centre PE114e

Reviews:

Related manuals for Work Centre PE114e

Brands by name

Popular brands

Xerox Work Centre PE114e, User Manual

Search results

Summary of Contents for Work Centre PE114e

Reviews:

Related manuals for Work Centre PE114e

Brands by name

Popular brands