Daily Management and Maintenance
3
71
3.1 Replacing Consumables
6.
When message "Ready to replace a print head" appears, open
the print head cover.
You can check that ink is removed from the tube connected to the
print head selected on the replacement screen.
7.
While pulling up the tab (
), lift the lever toward you (
).
Note
Only the lever of the print head selected in step 4. is
unlocked, and the others are locked. Do not attempt to
lift the lever forcedly.
8.
Fold the print head toward you (
) to pull out it (
).
Note
Install the cover removed from a new print head on
the used print head, and return it to your local Xerox
representative.
9.
Remove the cover from a new print head.
10.
Peel two protection tapes from a new print head.
Important
After peeling the protection tapes, keep your hand off
on the contact surface and nozzle surface of the print
head.
1
2
1
2
1
1
2
1
2
Summary of Contents for Wide Format IJP 2000
