Xerox WIDE FORMAT 721P Operator'S Manual Download Page 60

Page: 60 / 72

USER MODES

XEROX WIDE FORMAT 721P PRINTER OPERATOR MANUAL

6. 3) Press the [ <-- ] Key again to view and correct the next

location, C5 – minute.

Repeat the process to change the minutes if required
7. To change the minutes, press [Enter].

The minutes begin to flash.
8. To change the value, press the [ --> ] Key to increase the

value and [ <-- ] Key to decrease the value.

9. Press [Enter] to store the value.

Continue pressing the [ <-- ] Key to scroll to the remainder of the
setting locations and repeat the process until all of the time and
date corrections have been made

After the last location has been changed (C1 – year), pressing the
[ <-- ] Key again will display the corrected time.

Example: 12:00 and 30 seconds.

Pressing the [ <-- ] Key again will display the corrected date.

Example 2002, May 31

10. Press the [Online] Key to exit the User Mode.

Enter

Online

Year

Month

Day

Enter

Online

Enter

Online

Enter

Online

Hour

Minute

Second

Summary of Contents for WIDE FORMAT 721P









































































Search results

Summary of Contents for WIDE FORMAT 721P

Reviews:

Related manuals for WIDE FORMAT 721P

Brands by name

Popular brands

Xerox WIDE FORMAT 721P, Operator'S Manual

Search results

Summary of Contents for WIDE FORMAT 721P

Reviews:

Related manuals for WIDE FORMAT 721P

Brands by name

Popular brands