Xerox Versant 80 Press, System Administration Manual, Page: 59 / 230

Tip
Set value B so that an edge of the paper does not extend past a fold position of the
paper. An edge of paper extending past a fold position of the paper may cause a
paper jam.
15. Select Sample Printout again to print an output sample, and check the adjustment
results.
16. Make adjustments again if necessary.
17. Select Save.
18. Select Close until the Adjust Fold Position screen appears.
19. Select the tray in which you loaded paper in step 1, and then press the Start button.
20. Select the adjusted fold position type, and select Save.
21. Continue to select Save or Close until you are returned to the main Tools tab display.
22. Exit the administrator mode.
Using DFA Finisher Profiles (for Third-Party Finishing Devices)
Use the DFA Finisher Profiles feature to create a profile for the specified DFA device and
add, edit or delete attributes for the device, such as timing values.
Note
For information about the DFA settings to enter for the device, refer to the third-party
DFA Finisher documentation.
1. Log in as the administrator.
2. Press the Machine Status button on the UI.
3. Select the Tools tab.
4. Select System Settings > Common Service Settings .
5. Select Maintenance.
6. Scroll down the list to locate and select Finisher Adjustment and DFA Finisher
Profiles.
7. From the DFA Finisher Profiles screen:
a) If adding a new third-party finisher, select an available row and select Create/Edit.
Enter the name and other attributes for that device.
b) If changing information about an existing device, select that finisher's row and
select Create/Edit to edit the profile.
c) If removing a third-party finishing device, select that finisher's row and select
Delete.
8. Select Save.
9. Select Close.
10. Select Close again.
The main Tools screen displays.
11. Exit Administrator mode.
4-29 Xerox ® Versant ® 80 Press
System Administration Guide
System Settings (Tools Administrator Mode)