Xerox Versant 80 Press, System Administration Manual

Page: 46 / 230

Important
Do not use this function unless authorized and have checked with the Xerox service
representative. Selecting Start deletes all data recorded in the machine. This
includes all user settings, and data recorded automatically by the system.
b) Upon completion, select Close to return Maintenance screen.
8. Select Close.
The main Tools screen displays.
9. Exit the administrator mode.
Performing a Power On Self Test
1. Log in as the administrator.
2. Press the Machine Status button on the UI.
3. Select the Tools tab.
4. Select System Settings > Common Service Settings .
5. Select Maintenance.
6. Select Power On Self Test.
7. Select either On or Off to determine if a self test will be printed when the printer is
powered on.
8. Select Close.
The main Tools screen displays.
9. Exit the administrator mode.
Setting the Tray 5 Guide Adjustment
If the Bypass Tray is installed and a paper size detection error occurs, use this procedure
to calibrate the paper guide positions.
1. Log on as Administrator.
2. Press the Machine Status button on the UI.
3. Select the Tools tab.
4. Select System Settings > Common Service Settings .
5. Select Maintenance.
6. From the Maintenance screen, select Tray 5 Guide Adjustment.
7. Push the paper guides to their minimum width.
8. Select Minimum Position and press the Start button on the Control Panel.
If the sensor output value is within the specified range, OK displays in the Result box.
If the value is out of the specified range, NG displays. Check the guide position and
retry.
9. Push the paper guides to their maximum width.
10. Select Maximum Position and press the Start button on the Control Panel.
If the sensor output value is within the specified range, OK displays in the Result box.
If the value is out of the specified range, NG displays. Check the guide position and
retry.
11. Select Close.
Xerox ® Versant ® 80 Press 4-16
System Administration Guide
System Settings (Tools Administrator Mode)