Xerox VersaLink C605, User Manual

Page: 235 / 285

Fax Problems
Note: If the printer cannot send and receive faxes, make sure that you are connected to an
approved analog telephone line. The fax cannot send or receive when connected to a digital
phone line.
If you cannot send or receive faxes correctly, refer to the following tables.
PPrroobblleem mss SSeennddiinngg FFaaxxeess
Symptoms
Causes Solutions
The document is not scanned
using the document feeder. The document is too thick, too
thin, or too small. Use the document glass to send
the fax.
The document is scanned at an
angle. The document feeder guides are
not adjusted to the width of the
document. Adjust the document feeder
guides to fit the width of the
document.
The fax received by the recipient is
blurry. The document is positioned
incorrectly. Position the document correctly.
The document glass is dirty. Clean the document glass.
The text in the document is too
light. Adjust the resolution.
There is a problem with the
telephone connection. Verify that the telephone line is
working, then send the fax again.
There is a problem with the fax
machine of the caller. Make a copy to verify that your
printer is operating correctly. If the
copy was printed correctly, have
the recipient verify the condition
of the receiving fax machine.
The fax received by the recipient is
blank. The document was loaded
incorrectly.
• Document feeder: Place the
original document face up.
• Document glass: Place the
original document face down.
Fax was not transmitted. The fax number is wrong. Verify the fax number.
The telephone line is connected
incorrectly. Verify the telephone connection. If
it is disconnected, connect it.
There is a problem with the fax
machine of the recipient. Contact the recipient.
Xerox ® VersaLink ® C605 Color Multifunction Printer
User Guide
235
Troubleshooting