Xerox VersaLink B415, User Manual

Page: 252 / 324

PPRRO OB BA AB BLLEE C CA AU USSEESS SSO OLLU UTTIIO ON NSS
Using unsupported paper. Use only Xerox approved paper. For details, refer to
Supported Paper .
Humidity is too high for coated paper. Feed paper one sheet at a time.
Jams in the Document Feeder
PPRRO OB BA AB BLLEE C CA AU USSEESS SSO OLLU UTTIIO ON NSS
Unsupported paper of the wrong size, thickness, or
type. Use only Xerox-approved paper. For details, see
Supported Paper .
Originals are torn, previously stapled, bent, or folded. Ensure that the originals are not torn, bent, or folded. If
previously stapled, remove all staples and separate the
sheets by fanning them.
The documents loaded in the document feeder exceed
the maximum capacity allowed. Place fewer documents in the document feeder.
Improperly adjusted document feeder guides. Adjust the paper guides to fit snugly against the paper
loaded in the document feeder.
Paper Misfeeds and Paper Size Jams
PPRRO OB BA AB BLLEE C CA AU USSEESS SSO OLLU UTTIIO ON NSS
The paper is not correctly positioned in the tray.
• Remove the misfed paper and reposition it properly
in the tray.
• Adjust the paper guides in the tray to match the
size of the paper.
The paper tray is too full. Remove some of the paper. Do not load paper past the
fill line.
The paper guides are not correctly adjusted to the
paper size.
1 Remove the paper.
2 Adjust the paper guides in the tray to match the
size of the paper.
3 Replace the paper.
The tray contains warped or wrinkled paper. Remove the paper, smooth it out, and reload it. If it still
misfeeds, do not use that paper.
The paper is moist from humidity. Remove the moist paper and replace it with new, dry
paper.
Using paper of the wrong size, thickness, or type. Use only Xerox approved paper. For details, refer to
Supported Paper .
252
Xerox
®
VersaLink
®
B415 Multifunction Printer User Guide
Troubleshooting