Maintenance
Phaser 6700 Color Printer
89
User Guide
Periodic Maintenance
This section includes:
•
Replacing the Fuser ............................................................................................................................................................. 89
•
Replacing the Maintenance Kit ...................................................................................................................................... 91
For information on ordering supplies, see
Ordering Supplies
on page 104.
Replacing the Fuser
Note:
You can watch a video at the printer that shows the removal procedure. Select
Printer
>
Tools
>
Troubleshooting
>
Resolve Problems
>
Repeating Spots or Lines
, then touch the
Video
button to
watch the
Fuser
video.
WARNING:
To prevent electric shock, always turn off the printer and disconnect the power cord from
the grounded outlet before performing maintenance.
WARNING:
To avoid burns, do not replace the fuser immediately after printing. The fuser becomes
hot during use.
1.
Turn off the printer.
2.
Wait for 30 minutes before proceeding.
Summary of Contents for Phaser 6700DN
Page 30: ...Installation and Setup 30 Phaser 6700 Color Printer User Guide...
Page 50: ......
Page 66: ......
Page 108: ......