Xerox Phaser 6200, Service Manual

Page: 21 / 386

General Information 3
Proof Jobs.
A proof job is a specific case of a multiple-copy job. With a proof job, the
customer assigns a password and copy count at the client workstation before printing. The
first set of prints are printed immediately. The original number of requested sets are
printed after the customer enters the matching password on the printer’s control panel. The
customer has the option of printing the original number of requested sets or deleting the
job. Since more than one job may be associated with the same password, the customer can
print all the jobs, delete all the jobs, or select or delete individual jobs. A proof job that has
not been printed is retained on the optional internal hard drive through power cycles.
Secure Jobs.
Secure printing allows the customer to defer printing of a job until a
matching password is entered from the control panel. The customer assigns the password
at the client workstation before printing. The job is stored, and printing is delayed until the
password is entered on the printer’s control panel. Since more than one job can have the
same password, all secure jobs with the same password are printed. A secure job that has
not been printed or released is retained on the internal hard drive through power cycles.
Saved Jobs.
Saved print allows the user to save print jobs to the internal hard drive of
the printer. The print job is not deleted after printing, it is stored on the hard drive for print
on demand. This function requires an internal hard drive.
Printer Memory and RAM Capabilities
The printer features two slots which accept 64, 128 and 256 Mbyte of SDRAM. All
combinations are allowed for 64, 128, 192, 256, 320, 384 and 512 Mbytes.
■
PC133 DRAM Standard
■
144 Pin SODIMM
■
Serial Presence Detect
■
3.3 Volt
The Startup Page and the Configuration Page list the amount of RAM installed in the
printer.
If the memory does not meet the above specifications, it will be ignored by the printer.