Xerox Phaser 6100 User Manual Download Page 168

Page: 168 / 206

Repacking the Printer

magicolor 6100 DeskLaser User's Guide

7-12

Remove the media tray from the printer,
and then rotate the metal coupler arm
toward the front of the printer.

With the help of another person,
lift the printer by its carrying grips
from the lower feeder unit, and
place the printer on a table.

WARNING!

Your printer weighs

approximately 101 lbs (46 kg) without
consumables. Be sure to have help
when lifting and moving it.

ACHTUNG!

ACHTUNG! Das

Gewicht dieses Druckers beträgt
ohne Verbrauchsmaterial ca. 46 kg.
Bitte versuchen Sie niemals, den Drucker alleine anzuheben oder zu
transportieren.

Repack the lower feeder unit in its original shipping carton for storage or
shipment.

Note:

If you’re returning the printer for service, you don’t need to return the lower

feeder unit unless instructed to do so.

Summary of Contents for Phaser 6100















































































































































































































Search results

Summary of Contents for Phaser 6100

Reviews:

Related manuals for Phaser 6100

Brands by name

Popular brands

Xerox Phaser 6100, User Manual

Search results

Summary of Contents for Phaser 6100

Reviews:

Related manuals for Phaser 6100

Brands by name

Popular brands