Xerox Phaser 4600 User Manual Download Page 132 | Manualshive

Page: 132 / 150

background image

Safety

Xerox Phaser 4600/4620
User Guide

132

Operational Safety Information

Your Xerox machine and supplies have been designed and tested to meet strict safety requirements.
These include safety agency examination, approval, and compliance with established environmental
standards. To ensure the continued safe operation of your Xerox machine, follow these safety
guidelines at all times:

Electrical Supply

This section provides important electrical supply safety information that you should read before
installing or using the machine.

Read the information in the following sections:

•

Power Outlet Electrical Safety

on page 132.

•

Power Cord Electrical Safety

on page 132.

•

Laser Safety Information

on page 133.

•

Machine Safety

on page 133.

•

Emergency Power Off

on page 134.

•

Disconnect Machine

on page 134.

Power Outlet Electrical Safety

This machine must be operated from the type of electrical supply indicated on the data plate label
located on the rear cover of the machine. If you are not sure that your electrical supply meets the
requirements, please consult your local power company or a licensed electrician for advice.

The electrical supply outlet should be installed near the machine and should be easily accessible.

WARNING:

This machine must be connected to a protective earth circuit. This machine is

supplied with a plug that has a protective earth pin. This plug will only fit into an earthed electrical
outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact a
licensed electrician to replace the outlet. Always connect the machine to a correctly grounded
power outlet. If in doubt, have the outlet checked by a qualified electrician. Improper connection
of the machine-grounding conductor can result in electrical shock.

Power Cord Electrical Safety

•

Use only the power cord supplied with this machine.

•

Plug the power cord directly into a grounded electrical outlet. Do not use an extension cord. If you
do not know whether or not an outlet is grounded, consult a qualified electrician.

•

Do not place this machine where people might step on or trip on the power cord.

•

Do not place objects on the power cord.

«
...
130
131
132
133
134
...
»

Summary of Contents for Phaser 4600























































































































































Reviews:

No comments

Related manuals for Phaser 4600

Brand: Saxxot Pages: 13

Brand: Samsung Pages: 2

Brand: TallyGenicom Pages: 175

Brand: Samsung Pages: 165

Brand: Samsung Pages: 2

Inkjet SCX-1150F

Brand: Samsung Pages: 66

Brand: Samsung Pages: 155

CLX-3170FN series

Brand: Samsung Pages: 220

CLX 6210FX - Color Laser - All-in-One

Brand: Samsung Pages: 36

CLX-3160 Series

Brand: Samsung Pages: 139

Brand: Samsung Pages: 8

Lazett Combo SCX-4016

Brand: Samsung Pages: 2

Brand: Samsung Pages: 319

Brand: Tektronix Pages: 42

DocuPrint 4050 NPS

Brand: Xerox Pages: 248

Brand: Oki Pages: 57

Brand: Belkin Pages: 8

Brand: Ouring Pages: 54

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands