Xerox Phaser 4600 User Manual Download Page 136 | Manualshive

Page: 136 / 150

background image

Safety

Xerox Phaser 4600/4620
User Guide

136

Basic Regulations

Xerox has tested this machine to electromagnetic emission and immunity standards. These standards
are designed to mitigate interference caused or received by this machine in a typical office
environment.

United States (FCC Regulations)

This machine has been tested and found to comply with the limits for a Class A digital machine,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a commercial environment. This machine generates, uses, and can
radiate radio frequency energy. If it is not installed and used in accordance with these instructions, it
may cause harmful interference to radio communications. Operation of this machine in a residential
area is likely to cause harmful interference in which case the user will be required to correct the
interference at his/her own expense.

If this machine does cause harmful interference to radio or television reception, which can be
determined by turning the machine off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:

•

Reorient or relocate the receiver.

•

Increase the separation between the machine and receiver.

•

Connect the machine into an outlet on a circuit different from that to which the receiver is
connected.

•

Consult the dealer or an experienced radio/television technician for help.

Any changes or modifications not expressly approved by Xerox could void the user's authority to
operate the machine. To ensure compliance with Part 15 of the FCC rules, use shielded interface cables.

Canada (Regulations)

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.

«
...
134
135
136
137
138
...
»

Summary of Contents for Phaser 4600























































































































































Reviews:

No comments

Related manuals for Phaser 4600

Brand: QMS Pages: 86

Brand: Panasonic Pages: 2

ApeoSport C5540I

Brand: Fuji Xerox Pages: 108

Brand: IDStation Pages: 18

PhotoChrome R-38

Brand: LYSON Pages: 8

wematter Atmosphere

Brand: 3D Systems Pages: 11

Brand: Konica Minolta Pages: 15

PS100 - Photo Printer - 50 Sheets

Brand: Olympus Pages: 2

proColor pro900DP

Brand: Oki Pages: 18

Brand: Labelmate Pages: 61

DocuPrint C3300 DX

Brand: Xerox Pages: 200

ECOSYS P6230cdn

Brand: Kyocera Pages: 258

Brand: Star Micronics Pages: 194

Brand: 3D Printing Systems Pages: 56

Brand: Black Box Pages: 30

Brand: Copystar Pages: 1

Brand: Renkforce Pages: 12

Brand: Hitachi Pages: 161

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands