2.7
<System setup>
Printing a demo page
Print a demo page to make sure that the printer is operating correctly.
1
Press
Menu
and then
OK
when
Information
appears.
2
Press the
Up/down arrow
buttons until
Demo Page
appears and
press
OK
.
A demo page prints out.
Changing the display language
To change the language that is displayed on the
control panel
, follow
these steps:
1
Press
Menu
until
System Setup
appears on the bottom line of the
display and press
OK
.
2
Press
OK
when
Language
appears.
3
Press the
Up/down arrow
buttons to select the language you want
and press
OK
.
4
Press
Start/Stop
to return to Standby mode.
Using toner save mode
Toner save mode allows the printer to use less toner on each page.
Activating this mode extends the life of your print cartridge and reduces
your cost per page beyond what one would experience in the normal
mode, but it reduces print quality.
There are two ways to enable this mode:
Using the control panel button
Press
Toner Save
on the
control panel
. The printer must be in Standby
mode; the
Status
LED lights green and
Ready
is shown on the display.
• If the button backlight is on, the mode is enabled and the printer uses
less toner to print a page.
• If the button backlight is off, the mode is disabled and the printer prints
in normal mode.
From the software application
You can set toner save mode from the printer properties window on your
printer driver. See the
Software Section
.
