1.5
<Introduction>
Selecting a location
Select a level, stable place with adequate space for air circulation. Allow
extra space for opening covers and trays.
The area should be well-ventilated and away from direct sunlight or
sources of heat, cold, and humidity. Do not set the printer close to the
edge of your desk or table.
Clearance space
Front
: 500 mm (enough space
so that trays can be opened or
removed)
Back
: 350 mm (enough space
to allow opening of the
rear
cover
or the
duplex unit
)
Right
: 100 mm (enough space
for ventilation)
Left
: 100 mm (enough space
to allow opening of the
control
board cover
)
