![background image](http://html.mh-extra.com/html/xerox/phaser-3020bi/phaser-3020bi_user-manual_885479027.webp)
Network Installation
Xerox® Phaser® 3020
User Guide
19
c.
Select the
Enable
check box to enable
Dynamic
DNS
Registration
if required.
Note:
If your DNS Server does not support dynamic updates there is no need to select
Enabled
.
9.
In the
WINS
area, select the check box to enable
WINS
and enter details in the following fields:
a.
Primary WINS Server
b.
Secondary WINS Server
10. Select
Apply
to save the changes.
11. Select
OK
when the acknowledgement message displays.
IPv6
1.
At your workstation, open the Web browser and enter the IP Address of the machine in the
Address Bar.
2.
Press
Enter
.
3.
Select
Properties
.
4.
If prompted, enter the Administrator User Name (
admin
)
and Password
(
1111
), and select
Login.
.
Select
Properties.
5.
In
Network Settings
select
TCP/IPv6
from the directory tree.
6.
Select the
Enable
check box to enable IPv6 protocol and select
OK
.
7.
To set a manual address, select
Enable Manual Address
and enter the address and prefix in the
Address/Prefix
area. Information in the
Assigned IPv6 Addresses
box is automatically
populated.
8.
The machine performs auto-address DHCPv6 configuration every time it powers up. This is used
for neighbor discovery and address resolution on the local IPv6 subnet. However, you can choose
to use manual configuration, automatic configuration or a combination of automatic and manual
configuration.
In the
Dynamic Host Configuration Protocol Version 6 (DHCPv6)
area, select one of the
following options:
•
Use DHCP as directed by a router
- this option is fully automatic. The DHCPv6 Address
will be obtained and displayed on the screen.
•
Always Enable DHCP
- this option is fully automatic. The DHCPv6 Address will be
obtained and displayed on the screen.
•
Never use DHCP
- when this option is selected, you must configure the Manual Address
Options and DNS separately.
9.
In the
Domain Name System Version 6 (DNSv6)
area:
a.
Enter valid details in the
IPv6 Domain Name
field.
b.
Enter an IP addresses for the
Primary DNSv6 Server Address
and
Secondary DNSv6 Server
Address
.
c.
Check the
Dynamic DNSv6 Registration
check box to enable this option.
Note:
If your DNS Server does not support dynamic updates there is no need to enable DDNS.
10. Select
Apply
to save the changes.
Summary of Contents for Phaser 3020BI
