CentreWare
®
Internet Services
Xerox® Phaser® 3020
User Guide
17
•
Automatic
•
10 Mbps (Half Duplex)
•
10 Mbps (Full Duplex)
•
100 Mbps (Half Duplex)
•
100 Mbps (Full Duplex)
8.
Select on
Apply
to save the changes.
The change to Ethernet Speed rate will take effect after System Reboot screen appears.
9.
Select
OK
.
10. When the
Acknowledgement
screen displays, select
OK
.
11. Reboot the machine.
Adjusting the Altitude
Print quality is affected by atmospheric pressure, which is determined by the height of the machine
above sea level. The following information will guide you on how to set your machine for the best print
quality.
Wi-Fi must be configured before you adjust the altitude. See
Wireless Setting Program
.
Before you set the altitude value, determine the altitude where you are.
1.
Enter the IP Address of the printer in the browser.
2.
Select
Login
and enter the
ID
(admin) and
Password
(1111).
3.
Select
Properties
>
System
>
Setup
.
4.
Select an
Altitude Adjustment
value, based on your altitude in the table above.
5.
Select
Apply
.
Altitude
Value
0 - 1000 M
0 - 3,280 ft.
Normal
1000 - 2000 M
3,280 - 6,561 ft.
High 1
2000 - 3000 M
6,561 - 9,842 ft.
High 2
3000 - 4000 M
9,842 - 13,123 ft.
High 3
4000 - 5000 M
13,123 - 16,404 ft.
High 4
Summary of Contents for Phaser 3020BI
