Windows Printing
Xerox® Phaser® 3020
User Guide
36
5.
In the
Raw TCP/IP Printing
area:
a.
Select
Enable
.
b.
For
Port Number
, enter the required port number (1 - 65535).
6.
Select
Apply
to save the changes or
Undo
to return the settings to their previous values.
Note
The settings are not applied until you restart the machine.
Install Printer Driver
Refer to
Windows Drivers
.
Configure the Windows Printer Driver
Manual Printer Driver Configuration
To configure the printer driver without using bidirectional communication:
Follow the steps below:
1.
Select the Windows
Start
menu.
2.
Depending on your Operating System, navigate to the
Printers
or
Devices and Printers
setting.
3.
Select the
printer icon
and then select
Printing preferences
.
4.
Select each tab and change any default printer settings as required.
5.
Select
Apply
.
6.
Select
OK
.
Bi-Directional Support
Follow the steps below that are specific to your operating system:
1.
Select the Windows
Start
menu.
2.
Depending on your Operating System, navigate to the
Printers
or
Devices and Printers
setting.
3.
Select the
printer icon
and then select
Printer properties
.
4.
Select the
Ports
tab.
5.
Check the
Enable bidirectional support
check box.
Bi-directional communication automatically updates the printer driver with the printer's installed
options. The driver’s Printing Preferences will report information about the printer's operational
status, active jobs, completed jobs and paper status.
6.
Select
OK
.
Summary of Contents for Phaser 3020BI
