![background image](http://html2.mh-extra.com/html/xerox/legacy-4112/legacy-4112_instruction-manual_3505073008.webp)
Machine setup
Xerox 4112/4127 Copier/Printer
2-2
Backup/restore/migrate tools
4.
From
Local Area Connections
, select the
Support
tab; your computer’s IP address is listed
there.
5.
Record the computer’s IP address; this will be used later in this chapter.
6.
Close the
Local Area Connections Status
window. Close the
Network Connections
and
Control Panel
windows, if applicable.
Obtain machine information
Static IP address
Obtain your machine’s static IP address by performing the following steps:
Note
It is recommended that you use a static IP address on your machine (versus a DHCP
address). If your machine uses DHCP, you must specify the DNS host name; this is discussed in
the section entitled
Machines using DHCP on page 2-3
.
1.
From the machine’s User Interface (UI), press the
Machine Status
button on the
Control
Panel
.
2.
From the
Machine Information
tab, select
Print Reports...
3.
Select
Copy Reports
,
Configuration Report
, and then press the
Start
button on the
Control Panel
.
4.
Collect the printed
Configuration Report
from the machine’s exit area.
5.
After the report is printed, select
Close
until you are returned to the
Machine Information
tab (
Tools
) on the machine’s UI.
6.
Press the
Services
button on the
Control Panel
to exit Machine Status.
7.
On the printed Configuration Report, locate and record the machine’s host/domain name.
Summary of Contents for Legacy 4112
