Xerox DocuPrint C3120 DX, User Manual

Page: 24 / 105

Installation and Configuration on Windows 98/Me
24
[Output Settings] Tab
The following explains how to configure the [Output Settings] tab.
Setting Items
Job Type - Sets the type of your print job to [Normal Print], [Secure Print], or [Sample
Set].
Normal Print - Prints a job without using the Secure Print or Sample Set feature.
Secure Print - Temporarily stores a print job in the printer, rather than printing it
immediately, until you manually start the printing from the control panel.
Sample Set - Allows you to print a proof copy of a multi-set job and prints the entire
sets once the print result has been verified. If you set the print quantity to 1, this
setting automatically changes to [Normal Print].
NOTE: To select [Secure Print], the [Options] tab > [RAM Disk] must be set to
[Available]. To select [Sample Set], the [Options] tab > [RAM Disk] must be set to
[Available] and the [Configuration] tab > [Collated] must be set to [On].
User ID - Sets the user ID for the Secure Print or Sample Set feature with up to 8
alphanumeric characters.
Password - Sets the password associated with the user ID for the Secure Print feature.
The password can be up to 12 alphanumeric characters. Asterisks (***) appear instead
of text as you enter the password in this text box.
Retrieve Document Name - Sets the method of naming the document that will be
stored in the printer using the Secure Print or Sample Set feature. [Auto Retrieve]
automatically retrieves the document name from the application from which the
document will be printed. If the name exceeds 12 alphanumeric characters, only the
first 12 characters will be valid.