Xerox DocuPrint 92C, Installation Planning Manual

Page: 25 / 140

CONTROLLER COMPONENTS AND OPTIONS
XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODEL 92C NPS 2-9
Controller software
The installation of printer controller software is performed by your
service representative once all the hardware components are in
place and properly connected. The following is a summary of major
software components installed on the printer controller:
•
Xerox printer controller software
— UNIX Sun operating system
Note: The printer controller’s Sun operating system is
based on the standard Sun operating system; however, it
has been customized for use with the Xerox printer
controller. Therefore, not all standard Sun operating system
features are available.
— Additional software components for the user interface,
printer driver, PDL decomposer, Job Pool Manager, and
other operating system utilities.
•
Xerox Client Software
— Xerox client protocol software (an alternative to lpr)
downloaded to client workstations or PCs as a means to
communicate with the printer controller
— Windows client (Windows 3.1, Windows 95, or Windows
NT 4.0)
— Xerox PostScript and PCL print drivers
— Xerox PPDs for use with third-party print drivers.
•
Adobe Type 1 PostScript fonts
— ITC AvantGarde Gothic (Book, Book Oblique, Demi, Demi
Oblique)
— ITC Bookman (Demi, Demi Italic, Light, Light Italic)
— Courier (Courier, Bold, Oblique, Bold Oblique)
— ITC Garamond (Light, Light Italic, Bold, Bold Italic)
— Helvetica (Helvetica, Bold, Oblique, Bold Oblique, Light,
Light Oblique, Black, Black Oblique)
— Helvetica (Narrow, Narrow Bold, Narrow Oblique, Narrow
Bold Oblique)
— Helvetica (Condensed, Condensed Oblique, Condensed
Bold, Condensed Bold Oblique)
— ITC Korinna (Italic, Bold, Bold Italic)
— New Century Schoolbook (Roman, Bold, Italic, Bold Italic)
— Palatino (Roman, Bold, Italic, Bold Italic)
— Symbol
— Times (Roman, Bold, Italic, Bold Italic)
— ITC Zapf Chancery Medium Italic
— ITC Zapf Dingbats.