CONTROLLER COMPONENTS AND OPTIONS
XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODEL 92C NPS
2-3
•
CD-ROM drive:
The CD-ROM drive is a high density, read-only,
optical laser storage device used for loading the NPS operating
system and other files. The CD-ROM drive is located in the
processor above the diskette drive.
•
Cartridge tape drive (not shown):
An optional 8 GB, 4 mm
SCSI cartridge tape drive also is available for the NPS. Like the
diskette and CD drives, this tape drive is not an input source for
print jobs or for any other data or application. It provides the
service representative with another means of loading system
maintenance files or saving diagnostic information.
•
Back panel:
The back panel of the processor has a power
switch, a power receptacle and outlet, connectors, connector
openings, and ports. The following figure shows the back panel
of the Sun workstation that is a part of your NPS controller.
Figure 2-2.
Back panel of the Sun Ultra 2 processor
1 Power
inlet
2
Serial connectors (2): RS-432/RS-232
3
Graphics/video output: UPA slot
4 Sbus
slots
(Number of slots varies depending on the model)
5
Audio connectors (4)
6 Parallel
connector
7 Keyboard/mouse
connector
8 TPE
connector
9 MII
connector
10 UPA
slot
11 SCSI
connector
12 Power
on/Standby
switch
Display monitor
The display monitor has a 1192 x 700 pixel screen which displays the
NPS graphical user interface windows.
The graphical user interface allows you to interact with the printer
and to monitor its interaction with the various components. During a
print job, printer error messages may display to notify you of any
unexpected conditions.
11
9
8
7
6
5
12
1
2
3
4
10
3
2
0
1
Summary of Contents for DocuPrint 92C
Page 80: ......
