PREPARING FOR INSTALLATION
4-12
XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODEL 92C NPS
Connectivity requirements
A Token Ring network or an Ethernet local area network (LAN)
running Transmission Control Protocol/Internet Protocol (TCP/IP),
AppleTalk, or Novell NetWare software is the network
communication system used to transport documents from the client
workstation to the printer.
Ethernet specifications
The Ethernet connection to the printer controller processor must be
compatible with the Institute of Electrical and Electronics Engineers
(IEEE) 802.3 standard.
The Ethernet interface on the processor is a 10Mb/sec twisted pair
standard (10BaseT and 100BaseT). The MII (for UltraSPARC) Coax
Ethernet is enabled with an adapter cable.
The Ethernet interface on the printer controller processor is a 10Mb/
sec twisted pair standard (10BaseT and 100BaseT). Attachment Unit
Interface (AUI) Coax Ethernet is enabled with an adapter cable.
Work with your system administrator to assess what type of network
you have and what modifications need to be made to supply an
Ethernet connector to the printer controller processor.
Token Ring specifications
The Token Ring connection must be compatible with the IEEE 802.3
standard. The printer controller processor has a 4 MB/16 MB Token
Ring interface (16 MB is preferred).
Fiber Distributed Data Interface specifications
TCP/IP, Novell 3.x, and Apple Talk network protocols are supported
over FDDI. The FDDI supports a Single Connection configuration
only.
Table 4-4.
AppleTalk preinstallation checklist
AppleTalk Network Information
Information you supply
AppleTalk Phase 1 or 2
AppleTalk zone name
Network device used for the AppleTalk protocol
Summary of Contents for DocuPrint 92C
Page 80: ......
