PRINTER COMPONENTS AND OPTIONS
3-8
XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODEL 92C NPS
Bypass transport option
The bypass transport enables third-party finishing equipment to
connect to and interface directly with the printer. The bypass
transport requires that your printer have a dual stacker output module
configuration. Likewise, third-party finishing devices require that your
printer have a bypass transport.
The bypass transport option enables individual printed sheets of
paper to pass through the printer’s output module to third-party
finishing equipment. The third-party devices perform a variety of
finishing tasks such as saddle-stitching, binding, folding, stapling,
trimming, and stacking. These devices are usually stand-alone units
that can be connected in any number of configurations.
Figure 3-7.
Xerox DocuPrint 92C with bypass transport
1 Bypass
transport
2
Bypass transport support
The bypass transport fits into tray 1 of the dual stacker. With the
bypass transport, sheets of paper flow from left to right (when viewed
from the front of the printer), leading from the long edge of each
sheet. You can configure the output module to run with or without the
bypass transport. The bypass transport support is stationary and
cannot be removed. However, the support does not interfere with the
operation of trays 1 or 2 when the bypass transport is removed.
1
2
Summary of Contents for DocuPrint 92C
Page 80: ......
