Xerox DocuPrint 240A, User Manual, Page: 72 / 165

72
4 Settings on the Control Panel
Output Size
Specifies the paper size to be printed.
The candidate values are as follows:
[A4]
[A5] [B5]
[8.5×11] (Letter)
[8.5×14] (Legal)
[8.5×13] [7.25×10.5]
Output Tray
Specifies the output tray for printed paper.
[Center Tray] (default)
[Rear Tray]
[OffsetCatchTray]
Note
• [Rear Tray] is available only when the rear tray (optional) is installed.
• [OffsetCatchTray] is available only when the offset catch tray (optional) is installed.
Orientation
The paper printing direction can be selected from [Portrait] and [Landscape]. The default is
[Portrait].
2 Sided Print
Specifies whether to perform 2 sided printing. The default is [Off].
When you select [On], you can select [Long Edge Flip] or [Short Edge Flip] as the binding
direction.
Note
• You can set this item only when the duplex unit (optional) is installed.
Font
Specifies the font used. The default is [23 Courier].
Symbol Set
Specifies the font for symbols. The default is [ROMAN-8].
Font Size
Specifies the font size. The default is [12.00]. You can specify a value between 4.00 and
50.00 in increments of 0.25.
Font Pitch
Specifies the character spacing. The default is [10.00]. You can specify a value between
6.00 and 24.00 in increments of 0.01.
Form Lines
Specifies the form line (the number of lines per form). The default is [64]. You can specify
a value between 5 and 128 in increments of 1.
Quantity
Specifies the copies to be printed between 1 to 999. The default is [1 Sets].