manualshive.com logo in svg

Xerox DocuPrint 240A, User Manual, Page: 139 / 165

Share
Download
Xerox DocuPrint 240A User Manual Download Page 139

6.7 When Moving the Printer 

139

By aligning the slot of the feed roll with that 
of the shaft, push the feed roll completely in 
so that the short tab fits into the slot of the 
shaft.

5.

Push the paper tray completely into the printer.

6.7

When Moving the Printer

Carry out the following procedure when moving the printer.

CAUTION

• The machine, without the optional accessories, paper trays, consumables and paper, 

weighs 19.8 kg (DocuPrint 240A) or 21.0 kg (DocuPrint 340A). When moving the 
equipment, make sure that there are two or more persons carrying it.

• When lifting the machine, be sure to observe the following points.

Failure to do so may cause the machine to fall and result in injuries.
• 2 persons, one facing the front of the machine (control panel) and the other facing the 

back, should firmly grip the recessed areas on the bottom part of both sides of the 
machine. Never try to lift the machine by gripping any other areas.

• Bend your knees to avoid possible injuries to your back.
• Do not tilt the machine more than 10 degrees.

Important
• If the duplex unit (optional) or A4 universal tray (optional) has been installed, uninstall it before moving 

the printer. If these are not fixed securely to the printer, they may fall to the ground and cause injuries. 
For details on how to uninstall the optional accessories, refer to the manual that is bundled with each 
accessory.

Summary of Contents for DocuPrint 240A






































































































































































Reviews:

No comments