Xerox 490/980 Color Continuous Feed Printing System
Pre-Calibration Engine Density Adjustment
Color Management Guide
4-15
Decimal points are not allowed in a Queue Name, so substitute in a dash [
-
] if the paper
stock width is in a half-inch increment.
3.
In the Queue Name field, type [
TRC
_
[Paper Stock Width]
].
4.
Under the Data Format drop-down menu, select [
].
5.
In the Delete Job After Printing box, select the [
Manual
] radio button.
6.
For Input Process Mode, select the [
Spool
] and [
Do Not Hold Job
] radio buttons.
7.
For Output Process Mode, select the [
Spool
] and [
Do Not Hold Job
] radio buttons.
8.
For Extended Spool, select the [
Enable
] radio button.
9.
Select the [
Paper Setting
] tab.
10. Ensure that [
SYSTEM_DEFAULT
] is the selected stock set name.
11. In the Paper Identifier drop-down menu, select the imposition file [
Duplex_PreCal_
[Paper
Stock Width]
].
Summary of Contents for Document centre 490
Page 1: ...Xerox 490 980TM Color Continuous Feed Printing System Color Management Guide 27 October 2008...
Page 2: ......
Page 101: ......
