57
Setting up the Fiery XJ as a PostScript printer
T
O
PREPARE
THE
F
IERY
XJ
FOR
TCP/IP
AND
LPR
PRINTING
:
1.
With the Fiery XJ turned off, connect it to the network.
2.
Turn on the Fiery XJ and from the Control Panel, select PRINTER SETUP. Confirm that
one of the queues is enabled.
3.
Select NETWORK SETUP. Enable TCP/IP and enter the appropriate settings for
IP address, subnet mask and gateway address.
For details, see the Administrator Guide.
4.
Exit NETWORK SETUP and save changes.
The Fiery XJ reboots.
The TCP/IP Protocol and Microsoft TCP/IP Printing software should already be
installed on the Windows NT workstation.
T
O
SET
UP
TCP/IP
AND
LPR
PRINTING
FOR
W
INDOWS
NT 4.0:
1.
Open the Printer Properties dialog box for the Fiery XJ. Click Ports to display the Ports
property sheet.
