![background image](http://html1.mh-extra.com/html/xerox/docucolor-2060/docucolor-2060_installation-planning-manual_884733066.webp)
Preparing for installation
4-4
Installation Planning Guide
–
Install the necessary network connections required to
connect client workstations to the printer controller. Refer
to the “Network preinstallation checklist” in this chapter.
–
Install Ethernet or Token Ring to system location.
–
Obtain the necessary interfaces, cables, transceivers, etc.
NOTE: You are responsible for obtaining, stringing, and
maintaining fully-populated bus and tag cables for
channel-attached systems.
–
Sysgen your host to print to an AFP Type1, Group 3
printer. Refer to your IBM documentation for further
information.
–
Provide a list of the stocks you want in your default input
tray configuration.
–
Review the
NPS/IPS Installation Planning Guide
thoroughly.
–
Have the required parameters defined for configuring PSF
to print on the NPS/IPS. Refer to the “Defining the
channel attached printer to the host” or the “Defining the
printer to the host: TCP/IP attachment” appendix of this
guide for examples and explanations of these parameters.
•
Client workstations: Make sure all client workstations that
will be submitting print jobs have the proper hardware,
operating system, and networking software supported by the
DocuColor 2060DocuColor NPS/IPS system as client
platforms.
•
Training
–
Select the personnel to undergo operator training.
–
Set up the operator training schedules.
•
Applications
–
Work with your Xerox system analyst to determine
requirements for the initial applications.
–
In a mixed environment, where there is a variety of
printing systems, discuss print quality differences with
your service representative.
Summary of Contents for DocuColor 2060
