![background image](http://html1.mh-extra.com/html/xerox/docucolor-2060/docucolor-2060_installation-planning-manual_884733049.webp)
Printer components and options
Installation Planning Guide
3-7
Audio tones
The printer sounds an audible tone to direct your attention to a
printer problem.
There are three tones:
•
Attention
The Attention tone indicates that the button pressed is not
able to be selected.
•
Button selection
The Button Selection tone indicates that the button pressed is
able to be selected.
•
Fault
The Fault tone indicates that the printer is in a fault condition
and will not operate until the fault is cleared.
The tones can be activated or deactivated through the Tools
mode. For the procedure, refer to the
Guide to Performing
Routine Maintenance, the “Default settings“ chapter.
Pause
Not used for DocuColor 2060 NPS/IPS.
Start
Press the Start button in the Tools mode for certain settings. For information on the
Tools mode, refer to the
Guide to Performing Routing Maintenance
, “Default
settings” chapter.
Keypad
Use the keypad to enter:
•
Your password for access to Tools mode, or
•
The number of copies desired for a job.
C
Not used for DocuColor 2060 NPS/IPS.
Table 3-1. Control panel buttons (Continued)
Name and symbol
Function
Summary of Contents for DocuColor 2060
