Printer components and options
3-2
Installation Planning Guide
7. Transport module
8. Tray 3
9. Tray 2
10. Tray 1
11. Upper door
Input tray capacity
Tray capacity for the input trays is:
•
Trays 1 and 2 hold 550 sheets of 24-pound or 90 gsm bond
paper.
•
Tray 3 holds 2200 sheets of 24-pound or 90 gsm bond paper.
NOTE: For special stock, use tray 3.
All three input trays have buttons to specify weight. In addition,
tray 3 has selections for paper size (Non Standard or Standard),
and the paper type (Coated or Uncoated). You must use these
specifications for the printer to print properly. For the procedure
on loading paper and specifying the weight, paper size and
paper type, refer to the
Guide to Performing Routing
Maintenance, “Paper trays” chapter.
NOTE: Although the tray input buttons for the DocuColor 2060
require you to specify weight, you also specify media weight
when using the Set Tray command at the printer controller. The
buttons on the tray require you to specify weight in gsm, whereas
the Set Tray command allows you to use any unit of
measurement for weight. Therefore, the number you specify on
the tray, and the number you specify using Set Tray may be
different numbers, while still referring to the same actual weight.
Additionally, Set Tray allows you to specify 0 to indicate no
preference.
Output tray
capacity
The offset catch tray holds 500 sheets of 24-pound or 90 gsm
bond paper.
If you have the optional high-capacity stacker (HCS) or high-
capacity stacker stapler (HCSS), the built-in top tray in these
devices replaces the standard offset catch tray. Refer to the
“Printer options” section for information on these optional
stackers.
Summary of Contents for DocuColor 2060
