![background image](http://html2.mh-extra.com/html/xerox/docucolor-2060/docucolor-2060_maintenance-manual_3308232075.webp)
Default settings for the printer engine
Guide to Performing Routine Maintenance
7-23
4. Use the arrow buttons on the screen to enter the X and Y
dimensions of the paper that is used in the tray. The
dimensions shown on the screen above the X and Y boxes
indicate the minimum and maximum sizes you can enter.
5. Touch Close to return to the Machine Defaults 1 screen.
6. To use these settings, exit the Tools mode and ensure that
Non-Standard Size has been selected on the top front of the
tray.
Setting for printing on oversize paper
You can use trays 1 and 2 to run 12.0 by 18 inch or SRA3 (12.6
by 17.7 inch / 320 by 450 mm) paper by having your Xerox
representative remove the side paper guide on the paper tray,
then selecting the tray and the paper size on this screen.
To set for printing on oversize paper:
1. Access the Tools mode (refer to the section “Accessing the
Tools mode” in this chapter).
2. On the Machine Default 1 screen, touch the Oversize
Settings button. The Oversize Settings screen displays.
Figure 7-24. Oversize Settings screen
3. Touch the Tray 1 or Tray 2 button.
4. Touch the button for the oversize paper you want to run in the
tray.
5. Touch Close to return to the Machine Defaults 1 screen.
Summary of Contents for DocuColor 2060
