Feeder trays
1-12
Guide to Performing Routine Maintenance
Non-standard size paper
Non-standard size paper (7.2 to 12.6 inches / 183 to 320 mm
[LEF] or 7.2 to 19.2 inches / 183 to 488 mm [SEF]) can be
loaded into tray 4. Ensure that non-standard size paper is
selected on tray 4.
Letterhead
Preprinted letterheads are produced using different inks and dry
inks that may not pass through the printer intact. You should run
a sample job through the printer to determine output quality.
The loading orientation of letterhead paper depends on how the
job is programmed. It is recommended that a sample job always
be run first to ensure the proper orientation.
Coated paper
Follow the directions on the ream of paper when loading coated
paper.
Labels
Labels can be run but are not recommended. If you do use tray 4
to print labels, load labels face up.
Summary of Contents for DocuColor 2060
