![background image](http://html2.mh-extra.com/html/xerox/docucolor-2060/docucolor-2060_maintenance-manual_3308232059.webp)
Default settings for the printer engine
Guide to Performing Routine Maintenance
7-7
Power Saver
Use the Power Saver timer to set the time that will elapse until
the printer enters a reduced power consumption mode. This
timer is activated when all print jobs have been completed and
there are no jobs in the job queue.
The printer exits the Power Saver mode when a job is sent to be
printed, or when the Power Saver button on the control panel is
pressed.
To set the Power Saver timer:
1. Access the System Timers screen (refer to the section
“Accessing the timers”).
2. On the System Timers screen, touch the Power Saver
button. The Power Saver screen displays.
3. Use the up or down arrow buttons to change the time. The
range available is 1 to 240 minutes.
To use the system default time of 60 minutes, touch the
System Default button.
Figure 7-8. Power Saver screen
4. Touch the Enter button on the screen to enter the new time
into the system.
5. Touch the Close button to return to the Machine Defaults 1
screen, or select another timer to change.
Summary of Contents for DocuColor 2060
