P
AGE
10-8
X
EROX
C
OPY
C
ENTRE
/W
ORK
C
ENTRE
P
RO
32/40 C
OLOUR
Q
UICK
R
EFERENCE
G
UIDE
T
RO
UB
LE
S
H
O
O
TI
N
G
¾
If copying from the Document Glass, check the quality of the originals, set the
input to
Manual Size Input
, close the cover and try again. Ensure that the original
is entirely flat against the Document Glass.
Missing characters on output
¾
Load fresh paper.
¾
Try using a smoother paper.
¾
Select darken if the original is light or the font is coloured.
Gloss variations
¾
Check the quality of the original.
¾
If the original has large areas of solid density, adjust the contrast.
Ghosting
¾
Check the quality of the original.
¾
Clean the Document Glass, if it is being used.
¾
Rotate the original 180 degrees and try the job again.
The machine cannot sense the size of the original on the glass
¾
Select
[Original Input]
in the Image Adjustment Tab and enter the size.
¾
Rescan the original, leaving the cover down.
Jobs scan but do not print
¾
Some jobs require image processing before printing.
¾
Check the
Job Status
queue to determine if a job is processing. There may be a
job in the queue with a status of paused. Delete this job if it remains in the state
over 5 minutes.
¾
This may possibly be a result of an incorrect feature combination. The software
may need to be reset. Contact your System Administrator.
Output does not reflect the selections made on the Touch Screen
¾
Press
Clear All
between jobs.
Spode QRG.book Page 8 Tuesday, May 13, 2003 10:51 AM
