Xerox C410, User Manual

Page: 73 / 262

Installing Optional Trays
C Caauuttiioonn::
To avoid the risk of electrical shock, if you are accessing the controller board or installing
optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and
unplug the power cord from the electrical outlet before continuing. If you have any other devices attached
to the printer, then turn them off as well, and unplug any cables going into the printer.
1. Turn off the printer.
2. Unplug the power cord from the electrical outlet, and then from the printer.
3. Unpack the optional tray, and then remove all packing material.
4. Align the printer with the optional tray, and then lower the printer into place.
C CA AU UTTIIO ON N— —PPO OTTEEN NTTIIA ALL IIN NJJU URRYY::
If the printer weight is greater than 20kg (44lb), then it may
require two or more people to lift it safely.
Note: If you are installing any optional 550–Sheet Trays, place them below the Optional 550+100-Sheet
Tray.
5. Connect the power cord to the printer, and then to the electrical outlet.
C CA AU UTTIIO ON N— —PPO OTTEEN NTTIIA ALL IIN NJJU URRYY::
To avoid the risk of fire or electrical shock, connect the power cord
to an appropriately rated and properly grounded electrical outlet that is near the product and easily
accessible.
6. Turn on the printer.
Add the tray in the print driver to make it available for print jobs. For more information, refer to
Adding
Available Options in the Print Driver .
Xerox
®
C410 Color Printer User Guide
73
Set up, Install, and Configure