Xerox C410, User Manual

Page: 44 / 262

Selecting a Location for the Printer
• Leave enough room to open trays, covers, and doors and to install hardware options.
• Set up the printer near an electrical outlet.
C CA AU UTTIIO ON N— —PPO OTTEEN NTTIIA ALL IIN NJJU URRYY::
To avoid the risk of fire or electrical shock, connect the power
cord to an appropriately rated and properly grounded electrical outlet that is near the product and
easily accessible.
C CA AU UTTIIO ON N— —SSH HO OC CKK H HA AZZA ARRD D::
To avoid the risk of electrical shock, do not place or use this
product near water or wet locations.
• Make sure that airflow in the room meets the latest revision of the ASHRAE 62 standard or the CEN Technical
Committee 156 standard.
• Provide a flat, sturdy, and stable surface.
• Keep the printer:
– Clean, dry, and free of dust
– Away from stray staples and paper clips
– Away from the direct airflow of air conditioners, heaters, or ventilators
– Free from direct sunlight and humidity extremes
• Observe the recommended temperature and avoid fluctuations
Operating temperature: 10–32.2° C (50–90° F)
Storage temperature: 15.6–32.2° C (60–90° F)
• Allow the following recommended amount of space around the printer for proper ventilation:
11 Top 254 mm (10 in.)
22 Rear 102 mm (4 in.)
33 Right side 76 mm (3 in.)
44
Xerox
®
C410 Color Printer User Guide
Set up, Install, and Configure