Xerox C315, User Manual

Page: 170 / 376

M MEEN NU U IITTEEM M D DEESSC CRRIIPPTTIIO ON N
W Waaiitt TTiim meeoouutt
Off
On* (40 seconds)
Set the printer to wait for more data before canceling a
print job.
Note: An asterisk (*) next to a value indicates the factory default setting.
P C L
M MEEN NU U IITTEEM M D DEESSC CRRIIPPTTIIO ON N
FFoonntt SSoouurrccee
Resident*
Disk
Flash
All
Choose the source which contains the default font
selection.
• Flash and Disk appear only in some printer models.
• For Flash and Disk to appear, make sure that they
are not read- or write-protected.
FFoonntt N Naam mee
[List of available fonts] (Courier*)
Select a font from the specified font source.
SSyym mbbooll SSeett
[List of available symbol set] (10U PC-8*)
Specify the symbol set for each font name.
A symbol set is a set of alphabetic and numeric
characters, punctuation, and special symbols. Symbol
sets support the different languages or specific
programs such as math symbols for scientific text.
PPiittcchh
0.08–100 (10*)
Specify the pitch for fixed or monospaced fonts.
Pitch refers to the number of fixed-space characters in
a horizontal inch of type.
O Orriieennttaattiioonn
Portrait*
Landscape
Specify the orientation of text and graphics on the
page.
LLiinneess ppeerr PPaaggee
1–255
Specify the number of lines of text for each page
printed through the PCL
®
datastream.
• This menu item activates vertical escapement that
causes the selected number of requested lines to
print between the default margins of the page.
• 60 is the U.S. factory default setting. 64 is the
international factory default setting.
PPC CLL5 5 M Miinniim muum m LLiinnee W Wiiddtthh Set the initial minimum stroke width.
170
Xerox
®
C315 Color Multifunction Printer User Guide
Use the Printer Menus