Xerox C315, User Manual

Page: 220 / 376

E T H E R N E T
M MEEN NU U IITTEEM M D DEESSC CRRIIPPTTIIO ON N
N Neettw woorrkk SSppeeeedd Show the speed of an active network adapter.
IIPPvv44
Enable DHCP
On*
Off
Enable Dynamic Host Configuration Protocol (DHCP).
DHCP is a standard protocol that allows a server to
dynamically distribute IP addressing and configuration
information to clients.
IIPPvv44
Set Static IP Address
IP Address
Netmask
Gateway
Set the static IP address of your printer.
N Neettw woorrkk A Addddrreessss
UAA
LAA
Show the printer Media Access Control (MAC)
addresses: Locally Administered Address (LAA) and
Universally Administered Address (UAA).
You can change the printer LAA manually.
PPC CLL SSm maarrttSSw wiittcchh
Off
On*
Set the printer to switch automatically to PCL
emulation when a print job requires it, regardless of
the default printer language.
If PCL SmartSwitch is off, then the printer does not
examine incoming data and uses the default printer
language specified in the Setup menu.
PPSS SSm maarrttSSw wiittcchh
Off
On*
Set the printer to switch automatically to PS emulation
when a print job requires it, regardless of the default
printer language.
If PS SmartSwitch is off, then the printer does not
examine incoming data and uses the default printer
language specified in the Setup menu.
JJoobb B Buuffffeerriinngg
Off
On*
Temporarily store jobs on the printer hard disk before
printing.
• This menu item appears only when a hard disk is
installed.
• This menu item appears only in some printer
models.
M Maacc B Biinnaarryy PPSS
Auto*
On
Set the printer to process Macintosh binary PostScript
print jobs.
• On processes raw binary PostScript print jobs.
• Off filters print jobs using the standard protocol.
220
Xerox
®
C315 Color Multifunction Printer User Guide
Use the Printer Menus