Xerox B210, Service Manual

Page: 81 / 142

July 2019
4-28 Xerox® B210 Service Manual
REP 4.10
Initial Release Repairs - Adjustments
5. Remove the screw, then remove the Feed and Registration Sensor PWB Cover, Figure 2 .
Figure 2 Feed and Reg Sensors PWB Cover (Bottom View)
6. Release the latch, then remove the Feed and Registration Sensor PWB, Figure 3 .
Figure 3 Feed and Registration Sensors PWB (Bottom View)
7. Release the actuator from the latch, then remove the Feed and Registration Sensor Actu-
ators,
Figure 4 :
Figure 4 Feed and Registration Sensors Actuators (Bottom View)
Note the location of the Spring in the frame cutout for reinstallation, Figure 5 .
Figure 5 Actuator Spring Cutouts (Bottom View)
Screw
Latch
Latch
Sensors PWB
Feed Sensor Actuator
Latch
Spring
Reg Sensor Actuator
Spring
Spring Cutouts