Xerox B210, Service Manual

Page: 72 / 142

July 2019
4-19 Xerox® B210 Service Manual
REP 4.7, REP 4.8
Repairs - Adjustments Initial Release
4. Remove the Output Tray Full Sensor, Figure 2 :
a. Disconnect the connector from the Output Tray Sensor.
b. Unlatch, then remove the Output Tray Sensor.
Figure 2 Output Tray Full Sensor (Top Right View)
Replacement
Replacement is the reverse of the removal procedure.
NOTE: When installing the Main PWB, make sure the ground screw with large head is installed
in the correct location.
REP 4.8 Exit Roll and Bushings
Parts List on PL 4.3
Removal
1. Switch Off the Printer and unplug the Power Cord.
2. Remove the Top Cover, REP 3.2 .
3. Remove the Exit Roll and Bushings, Figure 1 :
a. Remove the Drive Gear.
b. Release the latch, rotate the bushing, then remove the bushings.
c. Remove the Exit Roll.
Figure 1 Exit Roll and Bushing (Top View)
Replacement
Replacement is the reverse of the removal procedure.
Output Tray Full Sensor
Exit Roll
Bushings
Driver Gear